EC-Drill® Technology
EC-Drill® Controlled Mud Level Technology
How Does EC-Drill® Control Bottom Hole Pressure?
EC-Drill® controls bottom hole pressure by raising or lowering the mud level in the marine riser. This provides a pressure profile that can help address narrow operating windows, depletion and pressure-related challenges during drilling, tripping and cementing.
Why Operators Choose
EC-Drill®
The EC-Drill® enables operators to 'drill the undrillable' well. It solves a long-standing challenge commonly encountered in many deep-water wells: Complex architecture from narrow pressure windows. Here’s what sets it apart:
-1.png?width=300&name=EC-Drill%20(2)-1.png)
When Should EC-Drill® Be Considered?
EC-Drill® is relevant to offshore wells with narrow operating windows, depleted formations or complex deepwater well designs. Explore the applications below to see how Controlled Mud Level can support different operations, then discuss your pressure-management requirements with our team to assess the fit for your well.
Pressure Management Challenges
Controls bottom hole pressure in narrow margins.
Adjusts annular pressure dynamically as formation conditions change.
Rapid pressure adjustments help mitigate and continue drilling safely.
Controlled ECD management for achieving zonal isolation.
Environmental & Regulatory
Trip safer and faster - and avoid displacements.
Fewer displacements operations = less fluid, less hassle.
Reduces section count and logistics through a unique pressure profile – and control.
Deepwater & Ultra-Deepwater
Combine sections in deepwater operations for a simpler well design.
Completion
Prevents losses and enables complete pack in long horizontals.
Increases the production rate by achieving a full screen-out when gravel packing.
See how the EC-Drill® technology deliver impact where it matters most.
Explore success stories from offshore operations where our solution helped reduce non-productive time, improve safety, and enable efficient drilling in some of the world’s most challenging environments.
EC-Drill® Technology
Dual Gradient in Gulf of Mexico Deepwater
EC-Drill® Technology
Drilling and Completing the Undrillable for Major Operator
EC-Drill® Technology
Instant Kick Detection Demonstrated on Deepwater Well
EC-Drill® Technology
Gravel Packing Without Inducing Losses
EC-Drill® Technology
Improved Production from Gas Producer
EC-Drill® Operational FAQs
We receive a lot of detailed questions from drilling teams, and we’re always ready to support. To make things easier, we’ve gathered some of the most frequently asked questions about EC-Drill® and provided clear, practical answers below.
By the IADC (International Association of Drilling Contractors) categorization System, EC-Drill® is a Controlled Mud Level (CML) system, it controls the mud level in the marine drilling riser. As a marine drilling riser is required, the system is only applicable to offshore wells.
- Subsea Pump Module (SPM) – instrumented pump system used to pump all mud and cuttings to surface.
- Control System – the computerized control system that controls and monitors the SPM and associated equipment allowing for precise control of fluid level in the riser and thereby well pressure.
EC-Drill® is a modular system that typically requires a 14ft Office Container, a 14ft Control Container, a Subsea Pump Module placed subsea and an Umbilical reel.


%20(1).png?width=1948&name=Well%20Diagram%20-%20Top%20Hole%20Section%20(without%20CTS)%20(1).png)

